5HP Small Plastic Bottle Blowing Machine 500ML PP Blow Width 230mm
|Place of Origin:||Cangzhou, China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 SET|
|Packaging Details:||Wooden Case Package|
|Delivery Time:||45 Days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||50 Sets Per Month|
|Name:||Full Automatic Milk Bottle Blow Molding Machine||Material:||HDPE|
|Screw Diameter:||65/75mm||Product Volume:||500ML- 3 Liter|
|Machine Weight:||3 Ton||Dimension:||4x2.2x2m|
|Motor Power:||11.5/18.5 KW||Production Capacity:||200-400 PCS/HR|
|Air Consumption:||0.4-0.6m3/min 8KG||Chiller:||5HP|
|Water Consumption:||Can Be Recycle||Electricity:||380V 3 Phases 4 Wires|
5HP small plastic bottle blowing machine,
500ML pp blow molding machine,
pp blow molding machine Width 230mm
HDPE/PP Small Plastic Bottle Blowing Machine
This type HDPE/PP Small Plastic Bottle Blowing Machine is suitable to produce 3 liter and small bottles under 3 liter, such as milk bottles, barrels, jars, water bottles, etc.
The small bottle machine could produce hollow products with material HDPE/LDPE/PP. The machine could operate easily with PLC control system, once operator setup the parameters, the machine could work smoothly without people attention.
The machine equipped with automatic de-flashing devices, the waste material could be de-flashed directly. The die heads could be 1,2,3, 4, so that the production capacity could be fourth times higher.
The machine is double stations, die heads could be single, double, triple or quadruple, so the molds should be reflected accordingly. The production capacity could be faster than only single die head. This machine also could install parison controller system, customer could control the wall thickness easily by parison controller. For small bottles, the die head could be three or four, customer could choose the quantity based on their needs.
This machine require 0.6m3/min 8KG air compressor, customer have to prepare the air compressor for machine operation. Chiller, crusher, auto loader is also needed for this kind of machine. Chiller help to cool the molds; crusher will break the waste material to be pieces and re-use again. Auto loader will help customer pump material to the hopper of the extruder.
|Max. Bottle Volume||3L|
|Max. Product Dia.||15CM|
|Production Capacity||400 PC/HR|
|Allowable Mold Width||230mm|
|Allowable Mold Thickness||110-230mm|