Payment & Shipping Terms:
|Max Volume:||3-6 Gallon||Weight:||2500kg|
|Usage:||Water 5 Gallon||Type:||Extrusion Blow Molding Machine|
|Key Word:||Blowing Machine||Size:||2.8*0.72*2.16 M|
Best Sale Factory Supply 5 Gallon Bottling Machine Blower Molding Machine
1. Special design for PET Gallon Bottle up to 6 Gallon
2. Produce wide mouth jar up to 25 liter with neck size up to 200mm.
3. Using Infrared reheat units to achieve uniform heating throughout the wall of preform
4. Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform
5. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
6. Water cooling system ensures the quality of preform neck.
Using PET material, 5 gallon blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm.. Those bottles are mainly used to contain pure drinking water for office and family uses. Our 5 gallon bottle blower machine is designed to produce high quality water drums at very competitive prices.
1.)Main blow molding machine
2.)Preform rotary preheater + inner preheater
3.)Chilling type air dryer(with built in rear/front filter)
4.)Low pressure air compressor
5.)High pressure air compressor
6.)Blow mould for 5 Gallon bottle
(1) Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.
(2) Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.
(3) Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
(4) Air tank is to receive and supply air for the machine as storage.
Main Machine : Max volum of Product : 3-6 gallon
Output : 50-180 pcs/hr
Weight of Main Blower :2500 kg
Measurement of Main Blower :2.8*0.72*2.16 m
|Neck Size Of Product||< 160 mm|
|Useful Area Of Mould Thickness||420*660 mm|
|Mould Thickness||350-420 mm|
|Mould Stroke||< 350mm|
|Clamping Force||80 kn|
|Working Pressure||≤10 kg/cm2|
|Blowing Air Pressure||≤40 kg/cm2|
|Power Of Main Blower||2 kw|
Preheater : Power : 16w
Weight : 800 kg
Measurement : 2200*750*1880 mm
The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products.
As the preform for 5 gallon bottle is thick and hard for uniform heating, some times, the final bottles will be pale if the preform is heated with the normal preheater. Therefore, besides the normal preheater, we add one inner heater to this line to get ideal uniform heating results, which is beneficial for easily forming the final bottle. The final bottle made in this way will be clear and even. There will be less deformed bottles so that you can save your production cost considerably.