Payment & Shipping Terms:
|Max Volume:||3-6 Gallon||Power:||2 KW|
Reheat Stretch Semi-auto Blow Molding Machine for 3 gallon PET Bottles
1. High safety. high speed with high efficiency.
2. Manual saving, one man is enough for operation the machine.
3. Stable performing with easy maintaining.
4. Imported PLC controlling and man-machine interface computer.
5. Adopt the new type double bend arm and the four rod-clamping structure(won the patent): Cross direction; Middle mould board is move parallel; the distance between two mold board is adjusted by the chain wheel. Thus, the clamping force is very strong.
5 gallon bottle stretch blow molding machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.
This 5 gallon bottle blowing machine consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.
What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.
MAIN TECHNICAL PARAMETER
|Main Machine||Max volum of Product||3-6 gallon|
|Neck size of Product||< 160mm|
|Useful Area of Mould Thickness||420*660 mm|
|Mould Thickness||350-420 mm|
|Mould Strock||< 350mm|
|Clamping Force||80 kn|
|Stretch Strock||530 mm|
|Working Pressure||< 10 kg/cm2|
|Blowing Air Pressure||< 40 kg/cm2|
|Power of Main Blower||2 kw|
|Weight of Main Blower||2500 kg|
|Measurement of Main Blower||2.8*0.72*2.16 m|
|Preherater||Power of Preheater||16 kw|
|Weight of Preheater||800 kg|
|Measurement of Preheater||2.2*0.75*1.88 m|
(1) Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.
(2) Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.
(3) Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
(4) Air tank is to receive and supply air for the machine as storage.
Warranty : One year from the date from the date of Installation or acceptance of the Plant whichever comes first.
Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring, Mould-adjustment wrench, Furnace temperature table, Furnace heating tube and other relative vulnerable part .
Installation : Experts’ team to buyer’s country after confirmation that the goods arrived in site and civil works completed get ready for installation. Funds for trip need to be payed by client and extra salary $50/day during the engineer’s journey.