Payment & Shipping Terms:
|Function:||Producing Fresh Water||Control Method:||Automatic PLC Control|
|Capacity:||According To Client Request||Other Name:||Water Treatment Plant|
|Automatic Grade:||Full Automatic||Desalinate Rate:||≥98.5%|
Stainless steel reverse osmosis water system water purification machine
1). Adopts imported RO membrane, which can remove 99.7% inorganic salt, heavy metal ion and completely get rid of colloid, microbiology organic materials, germ, protozoa, pathogens, bacteria, inorganic chemical and so on.
2). No need to add any chemicals, stable pure water quality, and no pollution drained, low produce cost.
3). Equipped with pretreatment system, such as active carbon absorption filter and PP sediment filter.
4). 304 stainless steel rack and pipe accessories connection.
5). Equipped with auto pressure protection system and on -line monitor.
6). Automatically and manually wash RO membrane. Also the design of washing the RO membrane is by chemical solution (citric acid or sodium hydroxide optional).
7). The lifespan of the whole system is long, operation simple, the applicability is strong
The two biggest selling types of bottled water are spring water and purified water. And, although the end result may taste the same, the processes of filtering are quite different. With spring water, the source must be an actual spring. The label must say so. And, the spring must be able to sustain the water production to make the choice to bottle it from there an economical choice. Not that would should be talking about beer in a water informational article, but you often hear in commercials that the beer is made with water from the Rocky Mountain springs. A typical spring water treatment process includes a filtration system that generally runs in series 5-micron filtration to 0.2-micron filtration. After the filtration process, the spring water is then usually treated with ozone to disinfect and preserve the water in the bottle. By maintaining the nature of the spring water, ozone is considered to be an acceptable disinfectant. Ozone oxidizes bacteria and organic materials and, over time, reverts back to oxygen.
Source tank →Feed water pump→ Muti-media filter(sands filter)→ Aactive carbon filter→ Watersoftener (or inhibitor dosing)→Cartridge/Security/Micro filter→High-pressure/ pump→ Reverse Osmosis system→ RO purified tank →Ultraviolet sterilizer
|1. Pre-treatment part|
|1.1||Sand filter||Remove turbidity, SS matter, organic matter, colloid, etc.|
|1.2||Active carbon filter||
Remove color, free chloride, organic matter,
harmful matter, etc.
|1.3||Water softener||Soft water and reduce it's hardness.|
|2. RO part|
|2.1||High pressure pump||Provide power for RO.|
Prevent large particles, iron, dust, SS matter,
impurity into RO membrane.
Remves: lead, cooper, barium, chromium, mercury,
sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
|3. Electricity control system|
|3.1||PLC+Touch screen control system||Import from Japan and Taiwan. WeiNveiw, Mitsubishi.|
|3.2||Electrivity components||Import from German. Schneider, Omron.|
|3.3||Pipe and fitting||Adopt domestic famous brands.|
Multi-medium filter: The equipment is a hermetically sealed chamber made of 1Cr18NiTi stainless steel which is set inside gritted rod, therefore get filtrated and clean.
Active carbon filter: This filter is designed for drinking water treatment. It can clear away alien color and foreign substance from the water and can remove heavy metal such as Mercury, Lead, Cadmium, Zink, Iron, Manganese, Chromium and Hydrogenate, Sulfide, Residual chlorine and other polymer organic compounds.
Sodion filter: This exchanging device is used for reducing the hardnes of hard water.
Ro System: It can removes the hydronium, organic substance, colloid, bacteria and other impurity by the method of membrane. And the water can be desalted and purified. The theory is as follows. The treated water and the untreated water are separated by the membrane; the treated water osmoses to the untreated water. There is osmotic pressure between the two. If the pressure is added to the untreated water and the pressure of the untreated water is bigger than the osmotic pressure, the water of the untreated water osmoses to the opposite position of the water. This applies the reverse osmosis to the desalted water. That is to say the untreated water is purified into the pure water through the RO membrane under adequate pressure. The left water which can not osmosis through the membrane contains a lot of solute and suspended substance, and it will be drained out as waste water.
1. Water treatment system includes silica and filter, active carbon filter, sodium ion exchanger, Ozone generator and UV Sterilizer, RO machine (If mineral water, use hollow fiber filter). All these machines made by stainless steel food stage.
2. This water treatment plants are used to treat the water from lake, spring, ground water and so on.
3. After treatment, the water can be drinked.
4. The treated water can be used in drinking water filling line, pure water filling line and mineral water filling line.
5. It is the ideal equipment to filter and disinfect water.
6. This water treatment plant manufactured by our factory is of high quality and low price. It is easy to operate and maintanence
The water must be pretreated before entering into the RO system, or it will bring damage to the RO membrane.
The RO system not only can be used for desalination, but also for filtering the organic substance and bacteria.
The production of water is monitored by the liquid crystal display conductivity meter.
The RO system needs be cleaned timely, including the stainless steel pump, filter, disinfectant tank, valve and other components.
Commonly, the RO system should work once every day. If it does not work in one week, it must be protected by some measures, or the service life of the membrane will be serious affected.
Q: Are you a factory or trading company?
A:HQ Machinery is a factory who has rich experiences in All kinds of bottle blow moulding machine, we offer OEM services in the last over 20 years, and now we have our own brands and own designed machines for sale!
Q: How long need to ship the machines after order
A: All machines can be ready and shipped in 20-60 days after order!
Q:Why should you choose our bottle blowing machine and liquid production line ?
A:We have been specialized in filling and bottling machine for more than20 years,and until now have exported mahcines to more than 180 countries.