Payment & Shipping Terms:
|Max Volume:||3-6 Gallon||Weight:||2500kg|
CE Approved With Semi-Automatic Blow Molding Machine (For 5-Gallon PET Bottle)
5 gallon bottle stretch blow molding machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.
This 5 gallon bottle blowing machine consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.
What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.
Preform heating-Introducing preform into the mould and closing unit-Inserting the stretching-Stretching and pre blowing-Final bottle blowing-Mould opening Discharge bottle from the mould.
MAIN BLOWING MACHINE
SIEMENS PLC controller. FESTO hydraulic elements, valves and pipes. MISHUBICH VVVF motor. The mould clamping system design is adopted by the advanced toggled lock design producing strong clamping force. The mould thickness can be adjusted by gear-turned belt automatically. On the blowing base of machine, an automatic moving device is assembled.
The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products.
As the preform for 5 gallon bottle is thick and hard for uniform heating, some times, the final bottles will be pale if the preform is heated with the normal preheater. Therefore, besides the normal preheater, we add one inner heater to this line to get ideal uniform heating results, which is beneficial for easily forming the final bottle. The final bottle made in this way will be clear and even. There will be less deformed bottles so that you can save your production cost considerably.
MAIN TECHNICAL PARAMETER
|Main Machine||Max volum of Product||3-6 gallon|
|Neck size of Product||< 160mm|
|Useful Area of Mould Thickness||420*660 mm|
|Mould Thickness||350-420 mm|
|Mould Strock||< 350mm|
|Clamping Force||80 kn|
|Stretch Strock||530 mm|
|Working Pressure||< 10 kg/cm2|
|Blowing Air Pressure||< 40 kg/cm2|
|Power of Main Blower||2 kw|
|Weight of Main Blower||2500 kg|
|Measurement of Main Blower||2.8*0.72*2.16 m|
|Preherater||Power of Preheater||16 kw|
|Weight of Preheater||800 kg|
|Measurement of Preheater||2.2*0.75*1.88 m|
1) Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally.
2) The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3) The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4) The machine can be operated in the step-by-step mode and the semi- auto mode.
5) The machine is small with low investment, easy and safe to operate by one person.
Q1: What’s your guarantee or the warranty of the quality if we buy your machines?
A1: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q2: When can I get my machine after I paid?
A2: Normally production time is around 30-60days,the exactly depend on what kind of machine you order.The shipping time is based on your destination port.
Q3: How to install my machines when it arrives?how much the cost?
A3: We will send our engineers to your factory to install the machines and train your staff how to operate the machines.
Customer pay airtickets go and back,accommodation and USD80/day/person.