Payment & Shipping Terms:
|Max Volume:||3-6 Gallon||Weight:||2500kg|
|Warranty:||12 Month||Power:||2 KW|
5 Gallon Water Bottle Blowing Machine Semi Automatic Bottles Making Equipment
1. Volume : 3-6 gallon
2. Material : PET
3. Output : 50-180 pcs per hour
5. Production range : mineral water etc.
5 gallon bottle stretch blow molding machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.
This 5 gallon bottle blowing machine consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.
What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.
MAIN TECHNICAL PARAMETER
|Main Machine||Max volum of Product||3-6 gallon|
|Neck size of Product||< 160mm|
|Useful Area of Mould Thickness||420*660 mm|
|Mould Thickness||350-420 mm|
|Mould Strock||< 350mm|
|Clamping Force||80 kn|
|Stretch Strock||530 mm|
|Working Pressure||< 10 kg/cm2|
|Blowing Air Pressure||< 40 kg/cm2|
|Power of Main Blower||2 kw|
|Weight of Main Blower||2500 kg|
|Measurement of Main Blower||2.8*0.72*2.16 m|
|Preherater||Power of Preheater||16 kw|
|Weight of Preheater||800 kg|
|Measurement of Preheater||2.2*0.75*1.88 m|
MAIN BLOWING MACHINE
SIEMENS PLC controller. FESTO hydraulic elements, valves and pipes. MISHUBICH VVVF motor. The mould clamping system design is adopted by the advanced toggled lock design producing strong clamping force. The mould thickness can be adjusted by gear-turned belt automatically. On the blowing base of machine, an automatic moving device is assembled.
The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products.
As the preform for 5 gallon bottle is thick and hard for uniform heating, some times, the final bottles will be pale if the preform is heated with the normal preheater. Therefore, besides the normal preheater, we add one inner heater to this line to get ideal uniform heating results, which is beneficial for easily forming the final bottle. The final bottle made in this way will be clear and even. There will be less deformed bottles so that you can save your production cost considerably.
1. Special design for PET Gallon Bottle up to 6 Gallon
2. Produce wide mouth jar up to 25 liter with neck size up to 200mm.
3. Using Infrared reheat units to achieve uniform heating throughout the wall of preform
4. Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform
5. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
6. Water cooling system ensures the quality of preform neck.
7. Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle
8. Use advanced PLC control system with counting function and time-control precision to 0.01second, and a use-friendly panel.
9. Equipped with special designed air storage units
10. Simple installation & startup adjustment
Warranty : One year from the date from the date of Installation or acceptance of the Plant whichever comes first.
Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring, Mould-adjustment wrench, Furnace temperature table, Furnace heating tube and other relative vulnerable part .
Installation : Experts’ team to buyer’s country after confirmation that the goods arrived in site and civil works completed get ready for installation. Funds for trip need to be payed by client and extra salary $50/day during the engineer’s journey.