13KW Jar Blow Molding Machine

1L, 2L, 3L Plastic HDPE Bottle Blowing machine

          This type HDPE plastic bucket/container blow molding machine is suitable to produce 3 liter and small bottles under 3 liter, such as milk bottles, barrels, jars, water bottles, etc.

          The small bottle machine could produce hollow products with material HDPE/LDPE/PP. The machine could operate easily with PLC control system, once operator setup the parameters, the machine could work smoothly without people attention.  

         The machine equipped with automatic cutting devices, the waste material could be cutted directly. The die heads could be 1,2,3, 4, so that the production capacity could be fourth times higher.

         The machine is double stations, die heads could be 1-4, so the molds should be reflected accordingly. The production capacity could be faster than only single die head. This machine also could install parison controller system, customer could control the wall thickness easily by parison controller.  For small bottles, the die head could be three or four, customer could choose the quantity based on their needs.  

         This machine require 0.6m3/min 8KG air compressor, customer have to prepare the air compressor for machine operation. Chiller, crusher, auto loader is also needed for this kind of machine. Chiller help to cool the molds; crusher will break the waste material to be pieces and re-use again. Auto loader will help customer pump material to the hopper of the extruder. 

         If buyer would like to recycle the extra material from plastic bottles, please purchase a crusher to process this job. The Crusher will break plastic to be pieces and operator could mix the recycled material with virgin material and use it again. Usually, mix 10-20% of the recycled material with virgin material, so that the quality could be maintain.